Home » john deere hy gard

John deere hy gard

Oil, lubricants and accessories. Hy-Gard and low-viscosity Hy-Gard transmission and hydraulic oils are unique oils developed by John Deere engineers to meet the exact needs of John Deere machines. Both Hy-Gard fluids are multi-viscosity fluids with high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.

Hy-Gard may be used in many applications specifying either of these grades. It also is used as a replacement for Hy-Gard in cold weather applications.

For Hy-Gard to work efficiently, it must flow readily through any part of the system. Oil that is too light can cause increased wear; too heavy will cause sluggish operation and lower mechanical efficiency.

TRANSMISSION HYDRAULIC FLUIDS

Because transmission and hydraulic oil must perform many different tasks at the same time, there is very little margin for error. Each manufacturer establishes a minimum requirement that oils should meet for use in their equipment.

The performance requirements for Hy-Gard are higher and many more performance tests are mandatory. Some applications are restricted in this temperature range. Hy-Gard has been formulated to ensure wet brakes have high braking capacity with minimum brake chatter.

Three elements are considered in the wet brake test:. Hy—Gard Oil is formulated to maximize brake capacity with minimum brake chatter and wear. This formula provides percent better brake chatter control than competitive oil. Better brake chatter control provides smooth stopping, reduced damage from vibration, less noise, and longer brake life. Return to top. Result: Customers can expect up to percent better clutch performance smoother engagement, less slippage, reduced wear when using John Deere Hy-Gard Transmission and Hydraulic Oil.

The smooth clutch engagement provides percent better clutch performance than competitive oils. Better clutch performance provides longer clutch life with reduced maintenance costs.

Hy-Gard allows limited clutch slippage for smooth engagement, which reduces clutch wear and provides long life. Too little clutch slippage results in rough, jerky engagement while too much slippage can cause clutch surfaces to burn or glaze. Result: Wear on transmission and final drive parts are reduced up to percent with Hy-Gard Transmission and Hydraulic Oil.

The anti-wear extreme pressure additives play a vital role in keeping gear and bearing wear to a minimum. Oil without these additives lacks the qualities to properly lubricate transmission parts. Hy-Gard and Low-Viscosity Hy-Gard are checked for proper viscosities using the slow-cool fluidity test in addition to the industry standards tests. Few competitive hydraulic-transmission oils are tested for this type of low temperature viscosity performance.Forum Rules.

Home Forums Reviews Articles Store. Homepage Today's Posts Search. Forgot your Password? Sign Up. Remember Me? Results 1 to 9 of 9. Thread Tools Show Printable Version. What other cheap brands of hydraulic oil meet this spec. I am about to the point of flushing the hydraulic system after a transmission swap and having the transaxle open on my I don't really want to spend a lot of cash on high dollar hydraulic oil that is only going to be in the tractor for a few minutes.

Re: Low-viscosity Hy-Gard alternatives it wont hurt to use the cheaper Tractor Supply etc oil for some time and switch to j20d which is the low vis oil.

Re: Low-viscosity Hy-Gard alternatives. Originally Posted by tbenn Re: Low-viscosity Hy-Gard alternatives Well, if I follow the recommended flushing procedure recommended to me by my technical resource Then another drain and fill at 25 hours. Still need to confirm that. Re: Low-viscosity Hy-Gard alternatives Where you located? I've got 7 gallons of Factory Fill Hygard that came out of my 80 hours I filtered it with a paint strainer and put it in brand new pails. I kept it because I couldnt just garbage "just like new" oil Where you located?

Last edited by Mechanos; at PM. Replies: 22 Last Post:PM.Once your order leaves our warehouse, you will receive a tracking number via email. Most orders ship within business days. If you have placed an order on the weekend, during a holiday or after 4pm EST during the week, we will begin processing your order during our next business day.

Rated only because of the price! I am positive JD could market and price this lol comparative to other manufacturers of their oils out there. It is a top quality oil, and lord only knows how much the average farmer or repair business uses it!!

That would stop the thought of putting lower cost oils in a JD tractor Used Equipment brought to you by:. See All Used Equipment. We are open and shipping orders Monday through Friday! Due to the adverse effects of COVID, please expect an additional business days on processing and shipping your order. Due to the adverse effects of COVID, please consider communicating via email instead of phone call. Search for:.

Hy Gard John Deere – Performance

John Deere Hy-Gard Transmission and Hydraulic Oil An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems. Hy-Gard viscosity places it between ISO 46 and 68 grades. Hy-Gard may be used in many applications specifying either of these grades. The exclusive Hy-Gard formula was designed for use in John Deere equipment; however, it can also be used in many non-John Deere transmission and hydraulic systems.

Performance-tested both in lab and in field, and approved by John Deere engineers to meet increased demands for performance and protection of transmissions and hydraulic oils. A polymeric viscosity improver helps Hy-Gard retain its proper viscosity over a wide range of operating temperatures.

Chemical and physical properties: Hy-Gard

For Hy-Gard to work efficiently, it must flow readily through any part of the system. Oil that is too light can cause increased wear; too heavy will cause sluggish operation and lower mechanical efficiency. High tolerance to water contamination without sludge formation, which could cause filter clogging and hydraulic system malfunction —anti-oxidation capability allows oil to work properly at high temperatures, helping keep transmissions and hydraulic system moving parts clean.

Anti-wear additives keep gear and bearing wear to a minimum — extreme pressure film in Hy-Gard helps prevent metal-to-metal contact.

Hy-Gard oil can be used in most applications calling for 10W or 5W engine oil for transmission and hydraulic oils. Interested in Used Equipment?This review is a no brainer really. I own several John Deere tractors and this hydraulic fluid is what John Deere recommends. I believe I got a good price on this 5 gallon pail of it and after changing the transmission oil on my tractor and experiencing the power steering come back to full power with no cold morning sluggishness, I am truly a happy camper.

Excellent oil for my john deere compact tractor Thank you. JD came with red atf type hydrostatic fluid, LV hygard recommended by dealer. Hydrostatic and loader and power steering continue to work well with LVH. Yes the oil does the job. Husqvarna Knob Part Honda Z0L Carburetor Craftsman 42in. Lawn Mower Deck Rebuild Assembly Exmark 5 inch Deck Wheel John Deere Lawn Tractors.

John Deere Lawn Mower Engines. John Deere Lawnmower Fuel Pumps. John Deere Lawnmower Mulching Kits. John Deere Lawn Mower Levers.

john deere hy gard

John Deere Lawnmower Bearings. Hi quality hydraulic fluid for select John Deere equipment This review is a no brainer really. Hy-Guard transmission oil Excellent oil for my john deere compact tractor No problem s JD came with red atf type hydrostatic fluid, LV hygard recommended by dealer.You've come to the right place to learn about a special breed of oil that keeps engines running in off-road conditions. In tractors.

In trucks. In utility vehicles. In pickups. In the field and on the highway. See how to buy in bulk.

john deere hy gard

Get all the details. For more details, view service ratings and features and the Plus II warranty statement. For more details, view service ratings and features. Look for your suggested John Deere replacement filters and service intervals when you need to replace your filters.

Skip to main content. Electronic Solutions.

John Deere Hydrostatic Transmission Fluid - Quarts=TY22035 - Gallons=TY22000

Rental Sales. View All Equipment. View Used Equipment. Make A One-Time Payment. Sign In to My Account. Owner Information. Oil, Filters, Grease, and Coolants. One engine oil on the farm. In the field.Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines.

Hy-Gard viscosity places it between ISO 46 and 68 grades. Both Hy-Gard fluids are multi-viscosity fluids with high-viscosity index. Hy-Gard may be used in many applications specifying either of these grades. For Hy-Gard to work efficiently, it must flow readily through any part of the system. Oil that is too light can cause increased wear; too heavy will cause sluggish operation and lower mechanical efficiency.

Because transmission and hydraulic oil must perform many different tasks at the same time, there is very little margin for error. Each manufacturer establishes a minimum requirement that oils should meet for use in their equipment. The performance requirements for Hy-Gard are higher and many more performance tests are mandatory.

Transmission Form Follow Us. Write a Review. Email a friend. Brand John Deere. Put me on the Waiting List. Functions Because transmission and hydraulic oil must perform many different tasks at the same time, there is very little margin for error. Related Items. Quick View. Add To Cart.John Deere engineers developed the Hy-Gard formula to meet the specific needs of our machines, testing it extensively in our own labs and many fields everywhere.

Exclusive John Deere formulation with proper and balanced performance over a wide range of fluid properties, providing unique characteristics. Exclusive John Deere formulation like Hy-Gard, specifically formulated for applications requiring a lower viscosity grade or for use in cold ambient conditions.

Good for the land and good for machines: rapeseed-oil based formulation for applications requiring biodegradable oil without compromising machine durability and service intervals. Suitable for forestry and turf care golf courses, cemeteriesconstruction, municipalities services, waterway, orchards and farming operations that require biodegradability. Compatible with standard elastomers seals. Skip to main content.

Future of Farming. View All Equipment. Used Equipment. Forestry Service.

Oil, Filters, Grease, and Coolants

Quality-tested performance John Deere engineers developed the Hy-Gard formula to meet the specific needs of our machines, testing it extensively in our own labs and many fields everywhere.

Hy-Gard Exclusive John Deere formulation with proper and balanced performance over a wide range of fluid properties, providing unique characteristics.

Features and benefits Outstanding transmission and hydraulics protection Excellent wet clutch performance for smooth operations Less wet brake chatter and maximum braking capacity Remarkable protection from wear, corrosion, sludge and oxidation Extraordinary oil shear protection Minimum gear and bearing wear.

Show More Show Less. Hy-Gard Low Viscosity. Hy-Gard Low Viscosity Exclusive John Deere formulation like Hy-Gard, specifically formulated for applications requiring a lower viscosity grade or for use in cold ambient conditions. Bio Hy-Gard II. Bio Hy-Gard II Good for the land and good for machines: rapeseed-oil based formulation for applications requiring biodegradable oil without compromising machine durability and service intervals.

john deere hy gard

The complete range - Lubricants. The complete range - Greases. Corn Head Grease. Lubricants Go back.


About the Author: Dule

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *